Half-Cut Pneumatic Knife holder
MT-A310
Introduce
MT-A310 is our first non-cut through knifeholder with depth stroke control and precision blade. It masters the handling of multilayer material half cut application precisely and easily. With depth adjustment of 14mm stroke and precision blade roundness of up to +/0.005mm , it performs well in only the upper layer cut off/non-cut through at lower layer and can also reduce blade wear out for lifetime extending. MT-A310 is available in numerous variations that you can flexibly match to your application. Its versatility makes it suitable for medical adhesive tapes, foam tapes and protection film
Model MT-A310-BSK30
;
Min. slit width 23mm
Max. slit speed 100M/min(1)
Down-stroke 0~14mm
Air Pressure 3~6/kg/cm²
Blade O.D. Ø76.2mm
Guide-bar GB02/GB04/GB05
Feature Precision depth adjustment
Half-cut effective
; Equipped high precision blade(+/-0.005mm)
Blade lifetime extended
Suitable Various Papers >>> kraft paper, silicone paper, releasing paper, decoration
wallpaper, masking paper, adhesive paper, thick paper
board, corrugated carton paper, sandpaper.
Various Plastic films >>> flexible laminated films, soft & rigid PVC films, BOPP,
PET, PE, PS, LDPE, PLA, SBS, various adhesive tape.
; Cloth & fabrics >>> non-woven cloth, synthetic leather, natural cotton, mesh
cloth, medical cloth, label cloth...etc.
Foams >>> PSP foams,PE foams..etc
Drawing
(1) The maximum slitting speed is according to the actual materials, thickness and slitting results.
Precise Fine-tuning
Everything is
under control
Increasing
Production
Requirements
Versatile
and Functional
Recommend
Crush Cut Knives
Precision blade
Each blade will undergo special precision grinding and control of each blade's roundness to reach +/-0.005mm before the product leaves our factory. The precision blade with fine grinding hardness backing roller and through A310/A310H half-cut knife holder depth adjusting allows you to cut as depth as you want.
Guide-bar
GB05
GB05 is the new generation of the Guide-Bar series. It has the advantage of the linear guideway groove, side-fixed installation, lightweight, and fast delivery. Besides, there are two lengths of guide-bar to choose from, 2000mm and 2400mm.
Crush Cut Knives
130T Unibody Zigzag knife
The 130 teeth zigzag blade is made of tool steel (SKD-11) imported from Europe, processed by well heat treatment to increase its mechanical properties such as toughness and wear resistance. The blade tip is precisely ground to maintain an equal tooth pitch and peak, the slitting edge will generate the zigzag notch, to facilitate tearing along the notch. The zigzag blade is suitable for easy-tear applications such as medical tapes.
Bearing
5.0mm/6.2mm Bearing
Bearings for score blade, there are two different model , 697ZZ is for 5.0mm thickness and 17mm inner diameter score blade ; 6900RS is for 6.2mm thickness and 22mm inner diameter.
Copyright © 2018 Motoknife All rights reserved.
